"Elite 200 is a digital panel meter specially designed fordual-source energy metering. It has two registers for recording,separately the energy consumption from the mains and auxiliarysupplies (such as a diesel generator).""It also provides load control so that the supply can bedisconnected if the load exceeds a pre-set limit. This isparticularly useful for installations where the auxiliary supplyhas a lower capacity than the mains."

ElectricalConnection type	CT-operated
Wiring configuration	3-phase 4-wire
Voltage range(configurable)*	240 V (L-N) / 415 V (L-L)
Current range	1-1.2 A , 5-6 A
Main frequency	50 Hz 5%
Accuracy	Class 0.5s, 1.0
Burden Voltage circuit	< 1.5 W, < 1 VA
Current circuit	< 0.5 VA
Overload	Withstand up to 130 % Imax continuous, 20 x Imax for 0.5 s
Compliance Standards	IEC 62052-11, IEC 62053-21, 22, 23
Mechanical Dimensions (W x H x D)	96 x 96 x 115 mm Cutout size 92 x 92 mm (DIN 96)
Depth behind bezel	84 mm
Enclosure	Polycarbonate
Terminals	Combicon connector
Weight	0.4 kg (approx) (with rack)
Max conductor size	2.5 mm2
Environmental Temperature	-10 C to +55 C (operating) -25 C to +70 C (storage)
Humidity	95% non-condensing
Ingress protection	IP 50 (front panel)Dielectric strength
Isolation	4 kV RMS, 50Hz
Impulse withstand	6 kV
Display	Custom backlit LCD
Favourite page	Configurable via keypad
CT/VT	primary Programmable via keypad
Communications	PACT port, Modbus via RS-485 port
Baud rate (Modbus)	1200, 2400, 4800, 9600, 19200 bd (field-configurable through keypad)
Pulse output (for load control)
Voltage rating	240 V AC
Current rating	100 mA DC max
Pulse input
Voltage rating	Variants for 12-40 V DC or 60-240 V AC
Current rating	100 mA DC max